关于最近面试的请教

今天去面了个号称的德国的公司,做连接器的.招的sourcing.我目前做SQE的,正好也负责连接器,所以去外高桥的该公司去瞧瞧.公司不大,品质部经理直接过来面,自我介绍不用英文,于是中文把工作内容讲了一遍.大概就是日常产线材料问题处理,供应商月度票期考核,IQC来料检验及不良品处理,供应商年度稽核及日常的针对具体的CASE 的QPA.我有解释过因为我们是台资,所以新供应商导入的SQE survey由台北在做.具体的做法大概先审文件再按照QSA逐项确认.之前电话面试已经和他解释过这点.交流后知道该职位也是想象中的sourcing.根据他的描述是他们质量部的所谓的sourcing先评估确认几个目标后,由采购去根据价格等再评估.其实个人觉得类似于systerm inspector.不过9000这块正好也是我的软肋,只是粗略看过文件和一些案例,也是山寨身份.他开始问:"你觉得稽核供应商主要看哪些方面,撇开QSA check list".
偶发虚,镇定后开始编:"我觉得文件对一个公司来讲一般不会有太大漏失.所以关键看实际的执行状况.看该公司CAPA的输入输出执行状况及手段.大概也就是文件中规定的相关记录及分析执行,比如外稽,内审及客诉等."
该主管不满意,又问:"如何评定一个新供应商有无能力达到你所要求的合格供应商,谈重点."
偶心想QSA check list不就是这个目的么.只好又编说:"从技术,客服及以往质量状况去考察.去查看相关记录是否量化,具体化并切实行动."
又问了些如何主导产品实现等问题,偶把APQP都搬出来了.其实我的材料本来就没那么复杂,厂商根据图样也差不多按照APQP流程去做,最后送样试样签样就OK了啊.
摇头说,都没答到重点:"看来你以前做的不是真正的SQE."失望啊!于是开始和他扯了一会就闪人了.

高人说说以上问题怎么回答啊.看制程究竟重点在哪啊.
另外下周还有个职位,请兄弟门看看重点在哪?在下多谢了.

Goals/Mission:Ensure suppliers are qualified and released according to the established process, ensure suppliers are audited and evaluated on regular base

Tasks:1.Assist quality manager and procurement manager to establish and implement quality management system for supplier management process;

1. Ensure supplier are evaluated, qualified and released according to the established process;
2. Establish quality assurance agreement with suppliers;
3. Plan and implement supplier audits in quality and code of conduct to evaluate process effectiveness of suppliers, initiate CAPA with suppliers if necessary;
4. Monitor supplier quality, initiate data analysis and CAPA if necessary;
5. Reports to SM manager and QP manager on regular base regarding supplier quality performance;
6. Act as quality contact window required in the quality agreement with suppliers;
7. Authority: as an independent Q function to review documents, and control release of suppliers.

Education:Bachelor degree or above, major in mechanical-electronics;

Job Language:EN

Knowledge/Languages:Good knowledge of quality systems, such as ISO:9001, ISO:14000.
Knowledge of ISO:13485 preferred;
Good command of verbal and oral English;

Experience:At least 2 years work experience in supplier audit;
Experience in process controlling preferred;

Additional Information:Willing to travel.