TA的首页电子线UL标签的说明与标识要求
1、 UL标签是证明产品符合安规要求的一种标识。在电线行业一般应用的为兰底黑字标识。
2、 主要由UL统一标识、标签号与数量标识组成(一般有250/500/1000/2000FT)
3、 标签中有分为UL标识与CUL标识两种。如果产品未申请或批准CUL的不允许使用带有CUL标识的标签
4、 UL标签中的号码具有不重复，使用厂家，时间先后性等作用。
5、 UL标签需粘贴在带有公司名称，描述有安规认证产品的名称，基本特证，包装数量，生产日期的空白处正面上。
6、 UL标签贴的时间为成品下线检验后包装前，(我司电线为在车间包装处)。
7、 内部转用与直接出货的UL产品要分开储存，且在标识上要有明显的区分。内转的不用贴标签，但要作好登记。
ZPFW2
插头有认证，少于4个组件 FORM 1-N[attachment=35506]插头无认证，少于4个组件 FORM 1-T[attachment=35507]插头有认证，4个及以上组件 FORM N[attachment=35508]插头无认证，4个及以上组件 FORM T[attachment=35509]
组装以后带的Fitting,没有绝对的分类,要具体的东西才能分别.常用的如一个housing,线挡,USB头等都是属于parts.要看看你的出货时候产品包含的总数.FORM 1-N: This Recognition Mark is used for harnesses consisting of four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device, etc. is considered to be a part. Simple terminations of the eyelet, ring, open spade or quick-connect types are not counted as a part when determining the form label to be used. One of the four (or less) parts may be a Listed power supply cord.小于等于4个FORM 1-T: This Recognition Mark is used for harnesses consisting of four part (or less) as described above, using as one of the parts, a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.大于4个FORM N: This Recognition Mark is used for harnesses having more than four parts as described above. The harness may include as one of the parts a Listed power supply cord.大于4个,同时这个产品包含了已经认证过的电源线产品.FORM T: This Recognition Mark is used for harnesses having more than four parts as described above and having as one of the parts a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.
大于4个,同时这个产品包含了没有认证过的电源线产品.此时个电源线就需要那电源线的标准来评估做测试.以上建议LZ只要明白前两种就行了,后面两种很少遇见.而且从目前市场来看,绝大部分都是属于FORM 1-T,至少占90%.
UL标签中确认的标签使用说明，应该是最具体真实的。主要是对于以下描述。
WIRING HARNESSES RECOGNITION MARKS电线接插件认可标签Form 1-N-- This Recognition Mark is used for harnesses consisting of four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device,etc. is considered to be a part. Simple terminations of the eyelet, ring, open spade or quick-connect types are not counted as a part when determining theform label to be used. One of the four (or less) parts may be a Listed power supply cord.形式 1-N - 这种认可标签用于包含了四个或少于四个部件的接插件,每一电线,装配附件,接头,接线盒,连线设备等都看作是一个部件. 简单的端子比如针眼型,环型, 开口铲型或快接型端子, 在决定标签的形式时,都不作为一个部件计算在内. 这四个(或少于四个) 的部件之一可能是列名的电源线.Form N-- This Recognition Mark is used for harnesses having more than four parts as described above. The harness may include as one of the parts a Listed power supply cord.形式 N - 这种认可标签用于包含多于上述的四个部件的接插件.这种接插件可能包括列名电源线作为其中的一个部件.Form 1-T-- This Recognition Mark is used for harnesses consisting of four parts (or less) as described above, using as one of the parts, a power supply cord which has not been previously Listed and, therefore, must be subjected to the tests prescribed for a power supply cord.形式 1-T - 这种认可标签用于包含上述四个(或少于四个)部件的接插件, 使用未经列名的电源线作为其中一个部件, 因此必须首先经过电源线的测试.Form T-- This Recognition Mark is used for harnesses having more than four parts as described above and having as one of the parts a power supply cord which has not been previously Listed and must, therefore, be subjected to the tests prescribed for a power supply cord.形式 T - 这种认可标签用于包含多于上述的四个部件的接插件, 并且使用未经列名的电源线作为其中一个部件, 因此必须首先经过电源线的测试.
2、 主要由UL统一标识、标签号与数量标识组成(一般有250/500/1000/2000FT)
3、 标签中有分为UL标识与CUL标识两种。如果产品未申请或批准CUL的不允许使用带有CUL标识的标签
4、 UL标签中的号码具有不重复，使用厂家，时间先后性等作用。
5、 UL标签需粘贴在带有公司名称，描述有安规认证产品的名称，基本特证，包装数量，生产日期的空白处正面上。
6、 UL标签贴的时间为成品下线检验后包装前，(我司电线为在车间包装处)。
7、 内部转用与直接出货的UL产品要分开储存，且在标识上要有明显的区分。内转的不用贴标签，但要作好登记。
ZPFW2
插头有认证，少于4个组件 FORM 1-N[attachment=35506]插头无认证，少于4个组件 FORM 1-T[attachment=35507]插头有认证，4个及以上组件 FORM N[attachment=35508]插头无认证，4个及以上组件 FORM T[attachment=35509]
组装以后带的Fitting,没有绝对的分类,要具体的东西才能分别.常用的如一个housing,线挡,USB头等都是属于parts.要看看你的出货时候产品包含的总数.FORM 1-N: This Recognition Mark is used for harnesses consisting of four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device, etc. is considered to be a part. Simple terminations of the eyelet, ring, open spade or quick-connect types are not counted as a part when determining the form label to be used. One of the four (or less) parts may be a Listed power supply cord.小于等于4个FORM 1-T: This Recognition Mark is used for harnesses consisting of four part (or less) as described above, using as one of the parts, a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.大于4个FORM N: This Recognition Mark is used for harnesses having more than four parts as described above. The harness may include as one of the parts a Listed power supply cord.大于4个,同时这个产品包含了已经认证过的电源线产品.FORM T: This Recognition Mark is used for harnesses having more than four parts as described above and having as one of the parts a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.
大于4个,同时这个产品包含了没有认证过的电源线产品.此时个电源线就需要那电源线的标准来评估做测试.以上建议LZ只要明白前两种就行了,后面两种很少遇见.而且从目前市场来看,绝大部分都是属于FORM 1-T,至少占90%.
UL标签中确认的标签使用说明，应该是最具体真实的。主要是对于以下描述。
WIRING HARNESSES RECOGNITION MARKS电线接插件认可标签Form 1-N-- This Recognition Mark is used for harnesses consisting of four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device,etc. is considered to be a part. Simple terminations of the eyelet, ring, open spade or quick-connect types are not counted as a part when determining theform label to be used. One of the four (or less) parts may be a Listed power supply cord.形式 1-N - 这种认可标签用于包含了四个或少于四个部件的接插件,每一电线,装配附件,接头,接线盒,连线设备等都看作是一个部件. 简单的端子比如针眼型,环型, 开口铲型或快接型端子, 在决定标签的形式时,都不作为一个部件计算在内. 这四个(或少于四个) 的部件之一可能是列名的电源线.Form N-- This Recognition Mark is used for harnesses having more than four parts as described above. The harness may include as one of the parts a Listed power supply cord.形式 N - 这种认可标签用于包含多于上述的四个部件的接插件.这种接插件可能包括列名电源线作为其中的一个部件.Form 1-T-- This Recognition Mark is used for harnesses consisting of four parts (or less) as described above, using as one of the parts, a power supply cord which has not been previously Listed and, therefore, must be subjected to the tests prescribed for a power supply cord.形式 1-T - 这种认可标签用于包含上述四个(或少于四个)部件的接插件, 使用未经列名的电源线作为其中一个部件, 因此必须首先经过电源线的测试.Form T-- This Recognition Mark is used for harnesses having more than four parts as described above and having as one of the parts a power supply cord which has not been previously Listed and must, therefore, be subjected to the tests prescribed for a power supply cord.形式 T - 这种认可标签用于包含多于上述的四个部件的接插件, 并且使用未经列名的电源线作为其中一个部件, 因此必须首先经过电源线的测试.
RSS Feed