FMEA 不合格项整改
DFMEA process can’t ensure all the failure mode was covered. 失效模式分析不能那个确保涵盖所有的失效模式。
Requirement:-
The product design output shall be expressed in terms that can be verified and validated against product design input requirements. The product design output shall include
——设计FMEA,可靠性结果;
Evidence observed:-
Failure mode of low temperature function was not covered for the project LEMA 6062.03 developed on Aug., 2008.
2008年8月开发的 6062.03项目,DFEMA没有覆盖低温性能的失效模式;
整改计划:
原因分析:1、产品设计小组未充分识别产品设计输入的所有要求的失效模式;
2、产品设计人员对FMEA工具了解不透彻
纠正措施:1、由CFT小组更新DFMEA
2、梳理产品设计开发其他项目有无遗漏失效模式;
3、对产品设计热呢员进行FMEA培训
Requirement:-
The product design output shall be expressed in terms that can be verified and validated against product design input requirements. The product design output shall include
- []design FMEA, reliability results,[/]
——设计FMEA,可靠性结果;
Evidence observed:-
Failure mode of low temperature function was not covered for the project LEMA 6062.03 developed on Aug., 2008.
2008年8月开发的 6062.03项目,DFEMA没有覆盖低温性能的失效模式;
整改计划:
原因分析:1、产品设计小组未充分识别产品设计输入的所有要求的失效模式;
2、产品设计人员对FMEA工具了解不透彻
纠正措施:1、由CFT小组更新DFMEA
2、梳理产品设计开发其他项目有无遗漏失效模式;
3、对产品设计热呢员进行FMEA培训
没有找到相关结果
已邀请:
3 个回复
可口可乐 (威望:21) (北京 怀柔) 机械制造 主管
赞同来自: